Jeep JK, JL, JT (Front or Rear) Transfer Case 1350 CV Driveshaft End Yoke. Will also fit the (Front or Rear) of a TJ with a Rubicon Transfer Case, 32 Spline (PM3112-CV01) DAN706527X-HD That's because the peaks of

That's because the peaks of the threads were created with pressure

Easy installation with basic hand tools

so if you're doing both sides

Straps have all sorts of different length

This kit comes with everything you need to install your cross over set up on your Dana 44

Jeep JK, JL, JT (Front or Rear) Transfer Case 1350 CV Driveshaft End Yoke. Will also fit the (Front or Rear) of a TJ with a Rubicon Transfer Case, 32 Spline (PM3112-CV01) DAN706527X-HD That's because the peaks ofJeep JK, JL, JT (Front or Rear) Transfer Case 1350 CV Driveshaft End Yoke. Will also fit the TJ with a Rubicon Transfer Case, 32 Spline (PM3112 CV01) Buy the kit with the CV bolts! Click Here. It will save a half hour of your LIFE every time you remove OR install the driveline. The small 12 point head gives you enough space between the yoke and the bolt to fit a 1 4" ratchet or ratcheting wrench. If you use bolts from the hardware store, they'll have