Raymarine 5M Backbone Cable f/SeaTalkng [A06036] Cartography | Garmin BlueChart Vision it’s easy to retrofit this

it’s easy to retrofit this 12” plotter in a wider range of dash configurations

Reactor™ 40 Steer-By-Wire Corepack for Volvo-Penta® with GHC™ 50 Autopilot Instrument

Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable

Preloaded with Garmin Navionics+™ mapping of 25

a backbone extender

Raymarine 5M Backbone Cable f/SeaTalkng [A06036] Cartography | Garmin BlueChart Vision it’s easy to retrofit thisBackbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone