Victron Energy Argofet 200-2 Two batteries 200A – ARG200201020R VE Bus BMS 002 W Max DC Current:

002 W Max DC Current: 22 A Max DC Inputs: 2 Has DC Fuses: 0 Connector: MC4   Included Connectors: 0 Euro Efficiency: 96

000 W Min PPT Voltage: 90 V Max PPT Voltage: 560 V DC Startup Voltage: 100 V DC Shutdown Voltage: 90 V Max Input Voltage: 600 V Max DC Power: 7

Can communication for monitoring and setup with a GX device

Maximum Charge Current (A) 160

output current at nominal output voltage and 40°C 18A

Victron Energy Argofet 200-2 Two batteries 200A – ARG200201020R VE Bus BMS 002 W Max DC Current:In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0,02 Volt at low current and averages 0,1 Volt at higher currents. When using ARGO FET Battery Isolators, there is no need to also increase the output voltage of the alternator. Care should taken however to keep cable lengths short and of sufficient cross section. Example: When a current of 100 A flows through a cable of 50 mm2 cross